Subli Glaze™ Industrial Coatings

Subli Glaze™ Clear Coating

Available in 5ltr and 25ltr sizes

This product is a solvent based 3-part gloss coating suitable for use on ceramics and metals.

Description Subli Glaze™

Clear Sublimation Coating facilitates the image transfer allowing sublimation inks to bond onto the polymer substrate; without Subli Glaze™ Clear Coating the image will not transfer.

Use it to

Provide a clear polymer layer which sublimation inks can bond to allow effective image transfer.

Important Information

Once mixed lacquer should be used within 3 hours. Clean using conventional gun wash or PU thinners.

How to use Subli Glaze™ Clear Coating

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

Touch dry after 2 hours.
Hard dry after 24 hours.
Fully cured after 72 hours.

Force cure at 200 ºC for 15 to 20 minutes.

Mixing Instructions

For 5ltrs of Subli Glaze™ Clear Coating mix with:

1.65ltrs of SG75 Subli Glaze™ Hardener
250ml of SG80 Subli Glaze™ Catalyst

For 25ltrs of Subli Glaze™ Clear Coating mix with:

8.25ltrs of Subli Glaze™ Hardener
1.25ltrs of Subli Glaze™ Catalyst

Order Instructions

For 5ltrs please order:

1x SG01 Subli Glaze™ Clear Coating 5ltr
2x SG75 Subli Glaze™ Hardener 1ltr
1x SG80 Subli Glaze™ Catalyst 250ml

For 25ltrs please order:

1x SG02 Subli Glaze™ Clear Coating 25ltr
2x SG76 Subli Glaze™ Hardener 5ltr
1x SG80 Subli Glaze™ Catalyst 250ml
1x SG81 Subli Glaze™ Catalyst 1ltr

Download the Subli Glaze™ Clear Coating Safety Data Sheet

Subli Glaze™ Matte Coating

Available in 5ltr and 25ltr sizes

This product is a solvent based 3-part gloss coating suitable for use on ceramics and metals.

Description

Subli Glaze™ Matte Sublimation Coating facilitates the image transfer allowing sublimation inks to bond onto the polymer substrate; without Subli Glaze™ Matte Coating the image will not transfer.

Use it to

Provide a Matte polymer layer which sublimation inks can bond to allow effective image transfer.

Important Information

Once mixed lacquer should be used within 3 hours. Clean using conventional gun wash or PU thinners.

How to use Subli Glaze™ Matte Coating

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

Touch dry after 2 hours.
Hard dry after 24 hours.
Fully cured after 72 hours.

Force cure at 200 ºC for 15 to 20 minutes.

Mixing Instructions

For 5ltrs of Subli Glaze™ Matte Coating mix with:

1.65ltrs of SG75 Subli Glaze™ Hardener
250ml of SG80 Subli Glaze™ Catalyst

For 25ltrs of Subli Glaze™ Matte Coating mix with:

8.25ltrs of Subli Glaze™ Hardener
1.25ltrs of Subli Glaze™ Catalyst

Order Instructions

For 5ltrs please order:

1x SG01 Subli Glaze™ Matte Coating 5ltr
2x SG75 Subli Glaze™ Hardener 1ltr
1x SG80 Subli Glaze™ Catalyst 250ml

For 25ltrs please order:

1x SG02 Subli Glaze™ Matte Coating 25ltr
2x SG76 Subli Glaze™ Hardener 5ltr
1x SG80 Subli Glaze™ Catalyst 250ml
1x SG81 Subli Glaze™ Catalyst 1ltr

Download the Subli Glaze™ Matte Coating Safety Data Sheet

Subli Glaze™ Frosted Coating

Available in 5ltr and 25ltr sizes

This product is a solvent based 3-part frosted coating suitable for use on glass.

Description

Subli Glaze™ Frosted Coating facilitates the image transfer allowing sublimation inks to bond onto the polymer substrate; without Subli Glaze™ Frosted Coating the image will not transfer.

Use it to

Provide a frosted polymer layer which sublimation inks can bond to allow effective image transfer.

Important Information

Once mixed lacquer should be used within 3 hours. Clean using conventional gun wash or PU thinners.

How to use Subli Glaze™ Frosted Coating

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

Touch dry after 2 hours.
Hard dry after 24 hours.
Fully cured after 72 hours.

Force cure at 200 ºC for 15 to 20 minutes.

Mixing Instructions

For 5ltrs of Subli Glaze™ Frosted Coating mix with:

1.65ltrs of SG75 Subli Glaze™ Hardener
250ml of SG80 Subli Glaze™ Catalyst

For 25ltrs of Subli Glaze™Frosted Coating mix with:

8.25ltrs of Subli Glaze™ Hardener
1.25ltrs of Subli Glaze™ Catalyst

Order Instructions

For 5ltrs please order:

1x SG05 Subli Glaze™ Frosted Coating 5ltr
2x SG75 Subli Glaze™ Hardener 1ltr
1x SG80 Subli Glaze™ Catalyst 250ml

For 25ltrs please order:

1x SG06 Subli Glaze™ Frosted Coating 25ltr
2x SG76 Subli Glaze™ Hardener 5ltr
1x SG80 Subli Glaze™ Catalyst 250ml
1x SG81 Subli Glaze™ Catalyst 1ltr

Download the Subli Glaze™ Frosted Coating Safety Data Sheet

Subli Glaze™ Wood Coating

Available in 5ltr and 25ltr sizes

This product is a water based 2-part coating suitable for use on wood.

Description

Subli Glaze™ Wood Coating facilitates the image transfer allowing sublimation inks to bond onto the polymer substrate; without Subli Glaze™ Wood Coating the image will not transfer.

Use it to

Provide a clear polymer layer which sublimation inks can bond to allow effective image transfer.

Important Information

Once mixed lacquer should be used within 5 hours. Clean using with clean warm water.

How to use Subli Glaze™ Wood Coating

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

Touch dry after 2 hours.
Hard dry after 24 hours.
Fully cured after 72 hours.

Force cure at 80ºC for 15 to 25 minutes.

Mixing Instructions

For 5ltrs of Subli Glaze™ Wood Coating mix with:

100ml of SG85 Subli Glaze™ Activator

For 25ltrs of Subli Glaze™Wood Coating mix with:

500ml of Subli Glaze™ Activator

Order Instructions

For 5ltrs please order:

1x SG10 Subli Glaze™ Wood Coating 5ltr
1x SG85 Subli Glaze™ Activator 250ml

For 25ltrs please order:

1x SG11 Subli Glaze™ Wood Coating 25ltr
2x SG85 Subli Glaze™ Activator 250ml

Download the Subli Glaze™ Wood Coating Safety Data Sheet

Subli Glaze™ UV Protection

Available in 5ltr and 25ltr sizes

This product is a solvent based coating for use on products that are exposed to sunlight.

Description

Subli Glaze™ UV Protection Coating can be applied at the end of the sublimation process (after the image has been transferred), to add a layer of protection against ultra violet radiation. Exposure to ultra violet light (i.e. Sunlight) can over time cause image fade; Subli Glaze UV Protection Coating protects against the effects of UV image fade.

Use it to

Protect transferred images against fading due to prolonged exposure to Ultra Violet light.

Important Information

Clean using conventional gun wash or PU thinners.

How to use Subli Glaze™ UV Protection

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

Touch dry after 10 minutes.
Hard dry after 4 hours.
Fully cured after 24 hours.

Force cure at 80ºC for 5 minutes.

Mixing Instructions

For 5ltrs of Subli Glaze™ UV Protection:

Use neat from the tin do not mix or thin this product

For 25ltrs of Subli Glaze™ UV Protection:

Use neat from the tin do not mix or thin this product

Order Instructions

For 5ltrs please order:

1x SG15 Subli Glaze™ UV Protection 5ltr

For 25ltrs please order:

1x SG16 Subli Glaze™ UV Protection 25ltr

Download the Subli Glaze™ UV Protection Safety Data Sheet

Subli Glaze™ White Base Coating

Available in 5ltr and 25ltr sizes

This product is a solvent based 2-part white base coating suitable for use on metals, glass, ceramic, and certain plastics.

Description

Subli Glaze™ White Base Coating is used when working with dark coloured substrates or substrates that do not allow any light to pass through them. Subli Glaze™ White Base Coating is applied before the Subli Glaze™ Clear Sublimation Coating to give the substrate a white background on which to transfer the image. The coating is applied wet on wet which means you do not need to dry the white base coating before applying Subli Glaze™ clear coating.

Use it to

Provide a solid white background on which to transfer an image.
Maximise the effect of the transfer of the image.

Important Information

Once mixed lacquer should be used within 3 hours. Clean using conventional gun wash or PU thinners.

How to use Subli Glaze™ White Base Coating

Spray using a conventional spray gun and cure by drying.

Typical drying times at room temperature are:

Touch dry after 2 hours.
Hard dry after 24 hours.
Fully cured after 72 hours.

Force cure at 200 ºC for 15-20 minutes.

Mixing Instructions

For 5ltrs of Subli Glaze™ White Base Coating mix with:

500ml of SG75 Subli Glaze™ Hardener

For 25ltrs of Subli Glaze™ White Base Coating mix with:

2.5ltrs of Subli Glaze™ Hardener

Order Instructions

For 5ltrs please order:

1x SG20 Subli Glaze™ White Base Coating 5ltr
5x SG78 Subli Glaze™ Primer 0.5ltr
2x SG75 Subli Glaze™ Hardener 1ltr
1x SG01 Subli Glaze™ Clear Coating 5ltr

For 25ltrs please order:

1x SG21 Subli Glaze™ White Base Coating 25ltr
3x SG79 Subli Glaze™ Primer 5ltr
2x SG76 Subli Glaze™ Hardener 5ltr
1x SG02 Subli Glaze™ Clear Coating 25ltr

Download the Subli Glaze™ White Base Coating Safety Data Sheet

Subli Glaze™ Translucent Coating

Available in 5ltr and 25ltr sizes

This product is a solvent based 4-part translucent coating suitable for use on glass and acrylics.

Description

Subli Glaze™ Translucent Coating is used when working with clear substrates such as glass or acrylics, where the image needs to be transferred to the back of the substrate, allowing light to pass through it. Subli Glaze™ Translucent Coating is applied after Subli Glaze™ Clear Coating is applied. The image transfers through the white coating so when viewed from the correct side the image has a white background. The coating is applied wet on wet which means you do not need to dry the white base coating before applying Subli Glaze™ clear coating.